14-6
▶
Measuring at (-) wiring
▶
Measuring the battery voltage
-
Measure the voltage between battery wiring
and body ground.
Specified value
If the voltage is out of the specified value,
check the wiring mounting bolt for
corrosion and looseness. If there is a poor
contact due to corrosion or paint, wipe out
the contact area and retighten it.
Wiring mounting bolt to body
ground (-): 17 Nm
-
Stop the engine and wait for 20 minutes.
Measure the voltage between terminal (+)
and terminal (-) with the ignition switch
OFF and all electric devices OFF.
Specified value
below 0.3V
over 12V