Setting Ssm - Siemens Sinamics G120 Function Manual

5.12.7

Setting SSM

Requirement
You are online with STARTER or Startdrive.
Procedure with STARTER and Startdrive
To set the SSM function, proceed as follows:
1. Open the screen form for the SSM safety function.
Figure 5-27
Figure 5-28
2. Selects the function with or without hysteresis.
3. Set the behavior when the motor is switched off.
If you have set the SSM feedback signal for pulse cancellation as "remains active", when
switching on the motor, you must maintain a specific signal sequence.
4. Set the speed to be monitored.
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD
Open the screen form for SSM in STARTER
Open the screen form for SSM in Startdrive
Switching on the motor when SSM is active (Page 278)
Commissioning
5.12 Setting extended functions
189