Sequence When Installing An Inverter With Safety Functions - Siemens Sinamics G120 Function Manual

Installing

4.2 Sequence when installing an inverter with safety functions

4.2 Sequence when installing an inverter with safety functions
The following overview shows the procedure for installing integrated safety functions in an
inverter. For information on some of the steps you will need to consult descriptions in other
manuals.
Procedure
To install the inverter, proceed as follows:
You have now installed the inverter.
46
1. If you are using a higher-level control system (PLC), then
create the control program first.
2. Install the inverter.
⇒ inverter operating instructions
3. Connect the inverter to the line supply, and wire the
standard inputs and outputs of the inverter.
⇒ inverter operating instructions
4. How do you wire the fail-safe digital inputs and outputs?
Controlling via a fail-safe digital input (Page 58)
Evaluating via a fail-safe digital output (Page 94)
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD