Response Times After Selection; General Information - Siemens Sinamics G120 Function Manual

8.5

Response times after selection

8.5.1

General information

The response times depend on the following conditions:
● Safety function setting
– Basic function
– Extended function
● PROFIBUS or PROFINET
● Selection via the fail-safe digital input or PROFIsafe.
The "worst case values" in the following tables mean the following:
Worst case for a fault-free inverter:
Worst case for an inverter fault:
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD
8.5 Response times after selection
The response time is less than or equal to the specified
value.
The response time is less than or equal to the specified
value. The response time is applicable for fault causes
within the inverter itself, e.g. for a defective microproces‐
sor.
System properties
373