Examples Of Acceptance Tests - Siemens Sinamics G120 Function Manual

Appendix
A.2 Examples of acceptance tests
A.2

Examples of acceptance tests

For the acceptance test, check whether the safety functions in the inverter have been set
correctly. The following acceptance tests are examples which demonstrate the basic
procedure. They are not suitable for every possible setting of the inverter.
Recommendations for the acceptance test
● Perform the acceptance test with the maximum possible velocity and acceleration to test
the expected maximum braking distances and braking times.
● The trace function in the STARTER and Startdrive PC tools can simplify the acceptance
test in certain applications: for example, if a drive in the machine is difficult to access.
Therefore, we recommend that you use the trace function for some acceptance tests.
● If you have recorded a trace for an acceptance test, you have to proceed as follows:
– When you save the trace, enter the storage location in the acceptance report.
– If you print the trace, append the printout to the acceptance report.
● If you can carry out the acceptance test without the trace function, there is no need to use
the trace.
● Alarm A01697:
This alarm is issued following each system startup and is not critical for acceptance.
After the acceptance test of the inverter's safety functions, you must also check whether the
safety-related functions in the machine or system are functioning correctly.
Acceptance support by the STARTER application
The "Safety Acceptance Test" application guides you semi-automatically through the
acceptance test of the safety functions. The application logs its settings as an Excel file.
Application acceptance test (http://support.automation.siemens.com/WW/view/en/73102423).
382
Acceptance - completion of commissioning (Page 209)
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD