Air flow Inspection
1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
2. Remove the AIR solenoid valve. (See SECONDARY AIR INJECTION (AIR) SOLENOID VALVE
REMOVAL/INSTALLATION .)
3. Inspect air flow between the ports under the following conditions:
If there is no malfunction, inspect the related wiring harnesses.
•
If there is any malfunction, replace the AIR solenoid valve. (See SECONDARY AIR
•
INJECTION (AIR) SOLENOID VALVE REMOVAL/INSTALLATION .)
(w)
Engine Specifications
Page 189