Mazda RX-8 Manual page 398

Hide thumbs Also See for RX-8:

Table of Contents

Use the designated genuine retainer only.

2. Install a new retainer onto the quick release connector. Visually inspect that the tabs of the

retainer are securely fitted into the quick release connector.

3. Inspect that the inside of the fuel pipe and the quick release connector is free of foreign materials

and damage. Clean as necessary, taking care not to damage the sealing surfaces.

4. Push the quick release connector into the fuel pipe until a click is heard.

5. Pull the quick release connector by hand and verify that it is installed securely.

Rollover Valve

1. Squeeze the tabs on the quick release connector and disconnect the fuel hose from the fuel pipe.

2. Cover the disconnected quick release connector and fuel pipe with vinyl sheeting or a similar material to

prevent it from being scratched or contaminated with foreign material.

Take care not to damage or soil the fuel hose.

Engine Specifications

Troubleshooting