FUEL INJECTOR
FUEL INJECTOR REMOVAL/INSTALLATION
1. Follow the before repair procedure and perform fuel line safety procedure. (See BEFORE REPAIR
PROCEDURE .)
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION .)
3. Remove the extension manifold (upper). (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION
.)
4. Remove the extension manifold (lower). (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION
.)
5. Remove the VDI actuator bracket installation bolt and the position the VDI actuator out of the way.
6. Disconnect the fuel injector connector.
7. Remove in the order indicated in the table.
(w)
Engine Specifications
Page 141