3. Then, select items from the screen menu in the following order.
1. Select "Programmable Module Installation".
2. Select "RKE".
Fig. 54: Identifying DLC-2 Location
Courtesy of MAZDA MOTORS CORP.
4. Perform the configuration according to the directions on the screen.
5. Retrieve DTCs by the M-MDS, then verify that there is no DTC present.
If a DTC (s) is detected, perform the applicable DTC inspection. (See DTC TABLE
[ADVANCED KEYLESS AND START SYSTEM] .)
TRANSMITTER BATTERY REPLACEMENT [KEYLESS ENTRY SYSTEM]
1. Insert a small flathead screwdriver into the transmitter notch and remove the key from the transmitter by
pressing the tab.
Fig. 55: Removing Key From Transmitter
Courtesy of MAZDA MOTORS CORP.
2. Insert a small flathead screwdriver into the transmitter notch and the transmitter.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9