Mazda CX-9 Grand Touring 2009 Manual page 1534

Fig. 59: Identifying Auxiliary Terminal Unit Screws
Courtesy of MAZDA MOTORS CORP.
4. Install in the reverse order of removal.
POWER SUPPLY SOCKET REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove auxiliary terminal unit panel. (See TRUNK SIDE TRIM REMOVAL/INSTALLATION .)
3. Press the tabs, pull the power supply socket outward, and then remove it.
4. Install in the reverse order of removal.
Fig. 60: View Of Power Supply Socket
Courtesy of MAZDA MOTORS CORP.
INVERTER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Trunk box (See TRUNK BOX REMOVAL/INSTALLATION .)
2. Seat side box (See SEAT SIDE BOX REMOVAL/INSTALLATION .)
3. Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION .)
4. Third-row seat (See THIRD-ROW SEAT REMOVAL/INSTALLATION .)
5. Rear scuff plate inner (LH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION .)
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Entertainment - Mazda CX-9