Mazda CX-9 Grand Touring 2009 Manual page 2198

Fig. 2: Identifying Main Fuse Screw
Courtesy of MAZDA MOTORS CORP.
IGNITION SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
3. Remove in the order indicated in the table.
Fig. 3: Identifying Ignition Switch Remove/Install Components
Courtesy of MAZDA MOTORS CORP.
4. Install in the reverse order of removal.
IGNITION SWITCH INSPECTION
1. Verify that the continuity between the ignition switch terminals is as indicated in the table.
If not as indicated in the table, replace the ignition switch.
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Power Systems - Mazda CX-9