Mazda CX-9 Grand Touring 2009 Manual page 2413

13. Connect the filament connector.
14. Install the high-mount brake light. (See HIGH-MOUNT BRAKE LIGHT
REMOVAL/INSTALLATION .)
15. Install the rear spoiler. (See REAR SPOILER REMOVAL/INSTALLATION .)
16. Install the rear wiper motor. (See REAR WIPER MOTOR REMOVAL/INSTALLATION .)
17. Install the liftgate lower trim. (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
18. Install the liftgate side trim. (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION )
19. Install the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
20. Install the rear wiper arm and blade. (See REAR WIPER ARM AND BLADE
REMOVAL/INSTALLATION .)
21. Connect the negative battery cable.
22. Allow the sealant to harden completely.
Sealant hardening time: 48 h
Fig. 47: Identifying Sealant Applying Area
Courtesy of MAZDA MOTORS CORP.
QUARTER WINDOW GLASS REMOVAL
1. Remove the following parts:
1. Trunk box (See TRUNK BOX REMOVAL/INSTALLATION .)
2. Seat side box (See SEAT SIDE BOX REMOVAL/INSTALLATION .)
3. Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION .)
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9