Mazda CX-9 Grand Touring 2009 Manual page 2025

3. Then, select items from the screen menu in the following order.
1. Select "PATS Function"
4. Select the items to be performed from the following:
Program Additional card key
Card Key Code Erase and Program
Steering Lock Unit Programming
Program additional ignition key
Ignition Key Code Erase and Program
Customer Spare Key Programming Enable
Customer Spare Key Programming Disable
Parameter Reset
5. The security access begins and the M-MDS displays the "OUT-CODE".
NOTE:
6. Input "IN-CODE" corresponding to "OUT-CODE" displayed on the M-MDS screen.
7. If the security access is successful, selected item can be performed.
IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION &
CLEARING [ADVANCED KEYLESS SYSTEM]
M-MDS EXECUTION MENU/SEQUENCE FOR THE IMMOBILIZER SYSTEM COMPONENT
PARTS REPLACEMENT
NOTE:
When the component parts of the immobilizer system are replaced, the
menu and execution sequence of the M-MDS vary depending on the type
of the replaced unit and parts. Perform the procedures referring to the
following table.
When performing the procedure, follow each procedure. If the procedure is
not followed, the procedure may not be completed correctly.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
When "OUT-CODE" is first displayed, turning the ignition switch from
the LOCK to the ON position 5 times will change the "OUT-CODE".
NO.1 ADDITIONAL KEY PROGRAMMING PROCEDURE (USING TWO
VALID KEYS)
NO.2 KEY ADDITIONAL PROGRAMMING PROCEDURE (USING THE
M-MDS)
NO.3 KEY REPLACEMENT PROCEDURE (CLEARING PREVIOUSLY
PROGRAMMED KEY ID NUMBERS, KEY RE-PROGRAM)
NO.4 PCM REPLACEMENT PROCEDURE
NO.5 KEY ADDITIONAL PROGRAMMING PROCEDURE CHANGING
NO.6 STEERING LOCK UNIT REPLACEMENT PROCEDURE