Mazda CX-9 Grand Touring 2009 Manual page 2335

2008 SUSPENSION On-Board Diagnostic (Suspension) - Mazda CX-9
READING DTCS PROCEDURE
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
When using the IDS (laptop PC)
1. Select "Self Test".
2. Select "Modules".
3. Select "IC".
When using the PDS (Pocket PC)
1. Select "Module Tests".
2. Select "IC".
3. Select "Self Test".
Fig. 3: Identifying DLC-2 Connector
Courtesy of MAZDA MOTORS CORP.
3. Verify the DTC according to the directions on the screen.
If any DTCs are displayed, perform troubleshooting according to the corresponding DTC
inspection.
4. After completion of repairs, clear all DTCs stored in the instrument cluster. (See DTC TABLE
[INSTRUMENT CLUSTER] .)
CLEARING DTCS PROCEDURES
1. Connect the M-MDS to the DLC-2.
2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
When using the IDS (laptop PC)
1. Select "Self Test".
2. Select "Modules".
3. Select "IC".
When using the PDS (Pocket PC)
2008 Mazda CX-9 Grand Touring