Mazda CX-9 Grand Touring 2009 Manual page 1673

Courtesy of MAZDA MOTORS CORP.
FUEL INJECTOR REMOVAL/INSTALLATION [MZI-3.7]
WARNING:
1. Complete the "BEFORE SERVICE PRECAUTION". (See BEFORE SERVICE PRECAUTION [MZI-
3.7].)
2. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZI-3.7] .)
3. Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [MZI-3.7] .)
4. Remove the dynamic chamber (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZI-
3.7] .)
5. Remove in the order indicated in the table.
Fig. 42: Identifying Quick Release Connector, Wiring Harness Retainer, Fuel Injector Connectors,
Clip & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
6. Install in the reverse order of removal.
2008 Mazda CX-9 Grand Touring
2008 ENGINE Fuel System (MZI-3.7) - Mazda CX-9
Fuel is very flammable liquid. If fuel spills or leaks from the
pressurized fuel system, it will cause serious injury or death and
facility breakage. Fuel can also irritate skin and eyes. To prevent
this, always complete the "Fuel Line Safety Procedure", while
referring to the "BEFORE SERVICE PRECAUTION".