Mazda CX-9 Grand Touring 2009 Manual page 2419

2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9
10. After the primer has dried, apply 11 mm {0.43 in} in thickness, 5 mm {0.20 in} in width of sealant using
a sealant gun. Where it is not applied properly, correctly apply it using a spatula.
Fig. 57: Applying In Thickness In Width Of Sealant
Courtesy of MAZDA MOTORS CORP.
11. Align the window side fastener with the bead on the body and adhere.
12. Press the quarter window glass until the quarter window glass fastener and stud pin are locked, and then
install the quarter window glass.
13. Install the following parts:
1. D-pillar trim (See D-PILLAR TRIM REMOVAL/INSTALLATION .)
2. Third-row seat belt upper anchor installation bolt (See REAR SCUFF PLATE
REMOVAL/INSTALLATION .)
3. C-pillar trim (See D-PILLAR TRIM REMOVAL/INSTALLATION .)
2008 Mazda CX-9 Grand Touring
Fig. 56: Applying Body Primer On Body
Courtesy of MAZDA MOTORS CORP.