Mazda CX-9 Grand Touring 2009 Manual page 1572

2. Rear sash molding (See REAR SASH MOLDING INSTALLATION.)
3. Front sash molding (See FRONT SASH MOLDING INSTALLATION.)
4. Rear beltline molding (See REAR BELTLINE MOLDING REMOVAL/INSTALLATION.)
5. Front beltline molding (See FRONT BELTLINE MOLDING REMOVAL/INSTALLATION.
6. Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION .)
7. Inner sail garnish (See INNER SAIL GARNISH REMOVAL/INSTALLATION .)
8. Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION .)
9. Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION .)
REAR SASH MOLDING REMOVAL
WARNING:
1. Press tab C in the direction of the arrow and remove it.
2. While cutting the double-sided adhesive tape using a flathead screwdriver or a razor, separate the rear
sash molding from the body.
3. Remove the tab D.
4. Rotate the rear sash molding in the direction of the arrow and remove tab A.
5. Rotate the rear sash molding in the direction of the arrow and remove tab B.
6. Remove the rear sash molding.
Fig. 38: Identifying Rear Sash Molding And Double-Sided Adhesive Tape Location
Courtesy of MAZDA MOTORS CORP.
EXTRACTOR CHAMBER REMOVAL/INSTALLATION
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Exterior Trim - Mazda CX-9
Using a razor with bare hands can cause injury. Always wear gloves
when using a razor.