teeth, then remove the plastic bag.
3. Put the steering rack into the gear housing.
4. Using a press, press-in the oil seal (gear housing side) and inner guide until the press-in force increases
rapidly.
Fig. 32: Installing Plastic Bag To Steering Rack Teeth
Courtesy of MAZDA MOTORS CORP.
OIL SEAL (HOLDER SIDE) ASSEMBLY NOTE
1. Assemble the oil seal (holder side) to the holder using a press and the SST.
Fig. 33: Assembling Oil Seal (Holder Side) To Holder Using Press And SST
Courtesy of MAZDA MOTORS CORP.
HOLDER ASSEMBLY NOTE
1. Assemble the holder to the gear housing using the SST.
2. Connect the SSTs to the power cylinder section of the gear housing.
2008 Mazda CX-9 Grand Touring
2008 STEERING Power Steering - Mazda CX-9