Mazda CX-9 Grand Touring 2009 Manual page 1812

2008 BODY & ACCESSORIES Instrumentation/Driver Info - Mazda CX-9
INSTRUMENT CLUSTER REMOVAL/INSTALLATION
CAUTION:
1. Perform the instrument cluster configuration when replacing it. (See INSTRUMENT CLUSTER
CONFIGURATION.)
2. Disconnect the negative battery cable.
3. Remove the following parts:
1. Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION .)
2. Front console box mat (See FRONT CONSOLE BOX MAT REMOVAL/INSTALLATION .)
3. Indicator panel (See INDICATOR PANEL REMOVAL/INSTALLATION .)
4. Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION .)
5. Center panel (See CENTER PANEL REMOVAL/INSTALLATION .)
6. Upper column cover (See COLUMN COVER REMOVAL/INSTALLATION .)
7. Meter hood (See METER HOOD REMOVAL/INSTALLATION .)
4. Remove in the order indicated in the table.
Fig. 2: Identifying Instrument Cluster Components
Courtesy of MAZDA MOTORS CORP.
5. Install in the reverse order of removal.
6. When replacing the instrument cluster of vehicles with the immobilizer system, perform the following
procedure:
See IMMOBILIZER SYSTEM COMPONENT REPLACEMENT/KEY ADDITION AND
CLEARING [KEYLESS ENTRY SYSTEM] .
2008 Mazda CX-9 Grand Touring
When replacing the instrument cluster, the configuration procedure
must be performed before removing the instrument cluster.
Replacing the instrument cluster without performing the
configuration procedure will result in system malfunction.