Mazda CX-9 Grand Touring 2009 Manual page 2277

Fig. 13: Identifying Lumber Support Lever & Pin
Courtesy of MAZDA MOTORS CORP.
SEAT WEIGHT SENSOR INSTALLATION NOTE
1. Install the seat weight sensor to the slide adjusters and temporarily tighten the four nuts.
2. Tighten nuts A (both right and left) at the same time to the specified tightening torque.
3. Tighten nuts B (both right and left) at the same time to the specified tightening torque.
4. Install the seat under bracket to the seat weight sensor and temporarily tighten the four nuts.
5. Tighten nuts C (both right and left) at the same time to the specified tightening torque.
6. Tighten nuts D (both right and left) at the same time to the specified tightening torque.
Fig. 14: Identifying Seat Under Bracket, Seat Weight Sensor & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Seats - Mazda CX-9