Mazda CX-9 Grand Touring 2009 Manual page 2075

Fig. 11: Identifying Bolts, Nuts, And Plate With SST
Courtesy of MAZDA MOTORS CORP.
4. Assemble the SST (bolts, nuts, and plate) set in Step 3 to the SST (arms) set in Step 2.
5. Adjust the SSTs (bolts) so that approx. 20 mm {0.79 in} of thread is exposed from the side of the SST
(plate).
6. Make the SSTs (arms and plate) parallel by adjusting the SSTs (bolts and nuts).
7. Tighten the SSTs (bolts and nuts) to affix the SSTs firmly.
Fig. 12: Identifying Engine With SST
Courtesy of MAZDA MOTORS CORP.
8. Mount the engine on the SST (engine stand).
WARNING:
2008 Mazda CX-9 Grand Touring
2008 ENGINE Lubrication (MZI-3.7) - Mazda CX-9
Self-locking brake system of the engine stand may not be
effective when the engine is held in an unbalanced position.
This could lead to sudden, rapid movement of the engine and
mounting stand handle and cause serious injury. Never keep
the engine in an unbalanced position, and always hold the
rotating handle firmly when turning the engine.