Mazda CX-9 Grand Touring 2009 Manual page 2442

2008 ACCESSORIES & BODY, CAB Wiper/Washer System - Mazda CX-9
2. Adjust the motor crank and wiper link No.1 so that they are parallel as shown in the figure.
3. Assemble the windshield wiper motor.
Fig. 8: Identifying Proper Position Of Motor Crank And Wiper Link
Courtesy of MAZDA MOTORS CORP.
WINDSHIELD WIPER MOTOR INSPECTION
1. Disconnect the windshield wiper motor connector.
2. Connect battery positive voltage to windshield wiper motor terminal A or B, and ground to terminal D,
then verify that the windshield wipers operate as shown in the table.
If the windshield wipers do not operate as indicated in the table, replace the windshield wiper
motor.
TERMINALS AND OPERATION CONDITION REFERENCE
Terminal connected to battery positive voltage Operation condition
2008 Mazda CX-9 Grand Touring
A
B
LO
HI