Mazda CX-9 Grand Touring 2009 Manual page 2210

Fig. 6: Locating Alignment Marks On Companion Flange (Front) And Constant Velocity Joint
Courtesy of MAZDA MOTORS CORP.
PROPELLER SHAFT INSTALLATION NOTE
1. Align the alignment marks and install the propeller shaft.
Fig. 7: Aligning Alignment Marks
Courtesy of MAZDA MOTORS CORP.
2. When installing a new propeller shaft, align the rear differential companion flange mark with the tag on
the propeller shaft so that they are at the nearest position, and assemble.
3. Perform a road test and verify that there is no abnormal vibration or noise.
Fig. 8: Aligning Rear Differential Companion Flange Mark
2008 Mazda CX-9 Grand Touring
2008 DRIVELINE/AXLE Propeller Shaft - Mazda CX-9