Mazda CX-9 Grand Touring 2009 Manual page 2020

4. Remove screw B, then remove the request switch.
Fig. 74: Identifying Request Switch & Handle Seat With Screws
Courtesy of MAZDA MOTORS CORP.
LIFTGATE
1. Disconnect the negative battery cable.
2. Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
3. Remove the liftgate side trim. (See LIFTGATE SIDE TRIM REMOVAL/INSTALLATION .)
4. Remove the liftgate lower trim. (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
5. Remove the rear finisher. (See LIFTGATE LOWER TRIM REMOVAL/INSTALLATION .)
6. Press the tabs and remove the request switch.
7. Install in the reverse order of removal.
Fig. 75: Identifying Request Switch & Rear Finisher
Courtesy of MAZDA MOTORS CORP.
REQUEST SWITCH INSPECTION [ADVANCED KEYLESS SYSTEM]
1. Inspect for continuity between request switch terminals A and B.
If not as specified, replace the request switch.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9