Mazda CX-9 Grand Touring 2009 Manual page 2051

2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Clearing the programmed key ID
number.
(See NO.3 KEY REPLACEMENT
3 PROCEDURE (CLEARING
PREVIOUSLY PROGRAMMED
KEY ID NUMBERS, KEY RE-
PROGRAM).)
Replace all the keys. (Steering lock
replacement or similar procedure)
(See NO.3 KEY REPLACEMENT
3 PROCEDURE (CLEARING
PREVIOUSLY PROGRAMMED
KEY ID NUMBERS, KEY RE-
PROGRAM).)
Changing the additional key
programming procedure. (Method
for programming other keys using
two keys that can start the engine is
4
disabled.)
(See NO.4 ADDITIONAL KEY
PROGRAMMING PROCEDURE
CHANGING.)
Changing the additional key
programming procedure. (Allows
programming using two keys that
4 can start the engine.) (See NO.4
ADDITIONAL KEY
PROGRAMMING PROCEDURE
CHANGING.)
2008 Mazda CX-9 Grand Touring
Registration
keys (Two or
more)
M-MDS
New keys
(two or more)
M-MDS
M-MDS
M-MDS
will be cleared.
Unless keys are
reprogrammed after the
procedure, the engine
cannot be started. Before
beginning the procedure,
verify that the customer has
turned in all of the keys for
the vehicle.
Two or more keys need to
be programmed after the
procedure to start the
engine.
The keys (two or more) to
prepare for the procedure do
not have to be new ones;
there is no problem with
using the keys with which
the engine can be started.
The previous keys will be
invalid since the steering
lock is replaced. Have two
or more new keys ready for
programming before
beginning the procedure.
Unless keys are
reprogrammed after the
procedure, the engine
cannot be started.
The additional key
programming using No. 1
cannot be performed after
the procedure. It is possible
to restore the setting. For
restoring the setting, the M-
MDS or equivalent is
necessary.
New vehicles have this
setting.
Unless keys are