2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9
Fig. 33: Identifying Dam Cut Point
Courtesy of MAZDA MOTORS CORP.
5. Align the marks made before removal and install the pin to the windshield referring to the figure, (when
reusing the glass, and the pin was removed)
6. Install the windshield molding.
Fig. 34: Identifying Hollowed Mark In Ceramic Coating
Courtesy of MAZDA MOTORS CORP.
7. Use glass primer on the glass, then allow it to dry for approx. 30 min.
CAUTION:
NOTE:
Make sure to apply primer to the hollowed marks in the ceramic coating.
Fig. 35: Identifying Primer Applying Area
2008 Mazda CX-9 Grand Touring
To prevent weakening of the primer adhesion, keep the bonding
surface free of dirt, moisture, and grease. Do not touch the
surface with your hand.