6. Install in the reverse order of removal.
CAUTION:
POWER WINDOW MOTOR REMOVAL/INSTALLATION
1. Fully lower the rear door glass.
2. Disconnect the negative battery cable.
3. Remove the following parts:
Front door
Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION )
Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION )
Front door speaker (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION )
Rear door
Inner sail garnish (See INNER SAIL GARNISH REMOVAL/INSTALLATION )
Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION )
Rear door speaker (See REAR DOOR SPEAKER REMOVAL/INSTALLATION )
4. Remove the bolts.
5. Remove the power window motor from the power window regulator.
6. Disconnect the power window motor connector.
7. Install in the reverse order of removal.
NOTE:
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Glass/Windows/Mirrors - Mazda CX-9
Make sure the cable does not unspool from the drum housing
when installing.
Fig. 14: View Of Rear Power Window Regulator
Courtesy of MAZDA MOTORS CORP.
When installing the power window motor to the power window
regulator drum, the drum housing tabs may detach from the door