Mazda CX-9 Grand Touring 2009 Manual page 1930

5. Line up the front fog lights with the white screen at a distance of 3 m {9.8 ft} apart.
6. Place an object in front of the fog light not being adjusted to block its light beam.
7. Start the engine so that the battery remains charged.
8. Turn the front fog lights on.
Fig. 17: Adjusting Front Fog Light Aiming
Courtesy of MAZDA MOTORS CORP.
9. Remove the adjusting bolt and cut the front fog light hole cover at the position shown in the figure.
10. Loosen the screw, move the front fog light in the direction of the arrows, and adjust the center of the front
fog light to the position shown in the figure.
11. Install the adjusting bolt and tighten the screw.
Fig. 18: Identifying Adjusting Bolt & Torque Specifications
Courtesy of MAZDA MOTORS CORP.
FRONT FOG LIGHT BULB REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the front undercover B. (See FRONT UNDER COVER REMOVAL/INSTALLATION .)
3. Remove in the order indicated in the table.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Lighting Systems - Mazda CX-9