Mazda CX-9 Grand Touring 2009 Manual page 2060

Procedure
Fig. 102: Resetting Procedure For - Immobilizer System When Replacing Instrument Cluster
Replacement
Courtesy of MAZDA MOTORS CORP.
1. Prepare two or more keys to be programmed after the key ID number is cleared.
2. Connect the M-MDS to the DLC-2. (See M-MDS CONNECTING PROCEDURE.)
3. Using the key 1, turn the ignition switch to the ON position.
NOTE:
4. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
When using the IDS (laptop PC)
Select "Body".
Select "Security".
When using the PDS (Pocket PC)
Select "Programming".
5. Then, select items from the screen menu in the following order.
1. Select "PATS Functions".
6. Select "Ignition Key Code Erase" from the M-MDS screen menu and perform the procedure according to
the M-MDS screen
7. Perform the security access according to the directions on the M-MDS screen. (See SECURITY
ACCESS PROCEDURE.)
8. Select "Parameter Reset" from the M-MDS screen menu.
9. Select the replaced parts according to the directions on the M-MDS.
If the instrument cluster is replaced: Select "IC".
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
instrument cluster replacement. (See INSTRUMENT CLUSTER
REMOVAL/INSTALLATION .)
Although the security light starts flashing and DTC 15 is displayed
after approx. 1 min, this does not indicate an improper procedure.
Continue to perform the procedure as indicated.