Mazda CX-9 Grand Touring 2009 Manual page 1707

Fig. 46: Ambient Temperature Sensor Temperature & Resistance Graph
Courtesy of MAZDA MOTORS CORP.
CABIN TEMPERATURE SENSOR REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Dashboard under cover (Driver side) (See DASHBOARD UNDER COVER
REMOVAL/INSTALLATION .)
2. Side wall (See SIDE WALL REMOVAL/INSTALLATION .)
3. Console panel (LH) (See CONSOLE PANEL REMOVAL/INSTALLATION .)
4. Hood release lever (See HOOD LATCH AND RELEASE LEVER
REMOVAL/INSTALLATION .)
5. Lower panel (See LOWER PANEL REMOVAL/INSTALLATION .)
3. Remove the screw.
4. Remove the cabin temperature sensor cover in the direction of the arrow.
5. Remove the cabin temperature sensor.
6. Install in the reverse order of removal.
2008 Mazda CX-9 Grand Touring
2008 HVAC Control System (HVAC) - Mazda CX-9