Mazda CX-9 Grand Touring 2009 Manual page 1906

Fig. 66: Identifying Front Door Trim Components
Courtesy of MAZDA MOTORS CORP.
REAR DOOR TRIM REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the inner sail garnish. (See INNER SAIL GARNISH REMOVAL/INSTALLATION.)
3. Open the cover A using a small flathead screwdriver and remove the screw.
4. Pull up the cover B and remove the screw.
5. Detach clips A from the front door using a fastener remover.
6. Pull the front door trim upward and detach tabs B from the front door.
Fig. 67: Identifying Rear Door Trim, Cover & Screw
Courtesy of MAZDA MOTORS CORP.
7. Remove tab A, and move the rear door trim in the direction of the arrow.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9