Mazda CX-9 Grand Touring 2009 Manual page 1864

2008 ENGINE PERFORMANCE Intake-Air System (MZI-3.7) - Mazda CX-9
Fig. 11: Identifying PCM Wiring Harness-Side Connector
Courtesy of MAZDA MOTORS CORP.
Open circuit
If there is no continuity, the circuit is open. Repair or replace the wiring harness.
Throttle body terminal A and PCM terminal 2BO
Throttle body terminal B and PCM terminal 2BR
Short circuit
If there is continuity, the circuit is shorted. Repair or replace the wiring harness.
Throttle body terminal A and power supply
Throttle body terminal A and ground
Throttle body terminal B and power supply
Throttle body terminal B and ground
ACCELERATOR PEDAL REMOVAL/INSTALLATION [MZI-3.7]
1. Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZI-3.7] .)
2. Remove the dashboard under cover (Driver side). (See DASHBOARD UNDER COVER
REMOVAL/INSTALLATION .)
3. Remove in the order indicated in the table.
Fig. 12: Identifying Accelerator Pedal, Connector & Torque Specification
Courtesy of MAZDA MOTORS CORP.
4. Install in the reverse order of removal.
2008 Mazda CX-9 Grand Touring