Mazda CX-9 Grand Touring 2009 Manual page 1903

Fig. 61: Identifying Trunk Side Trim Remove/Install Components (Driver Side)
Courtesy of MAZDA MOTORS CORP.
PASSENGER SIDE
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Trunk box (See TRUNK BOX REMOVAL/INSTALLATION.)
2. Seat side box (See SEAT SIDE BOX REMOVAL/INSTALLATION.)
3. Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)
4. Third-row seat (See THIRD-ROW SEAT REMOVAL/INSTALLATION .)
5. Rear scuff plate inner (RH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
6. Third-row seat belt lower anchor installation bolt (RH) (See THIRD-ROW SEAT BELT
REMOVAL/INSTALLATION .)
3. Pull the cup holder upward and detach clips A, pins B, and tabs C.
4. Remove the cup holder.
5. Remove the bolts, and remove the cargo net hook.
6. Remove the cover.
7. Remove the screw.
8. Remove the bolts.
9. Pull the trunk side trim outward and detach clips D, tabs E, and pin F.
10. Disconnect the accessory socket connector.
11. Remove the trunk side trim.
12. Install in the reverse order of removal.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9