Mazda CX-9 Grand Touring 2009 Manual page 2059

NOTE:
2. Connect the M-MDS to the DLC-2. (See M-MDS CONNECTING PROCEDURE.)
3. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.
When using the IDS (laptop PC)
Select "Body".
Select "Security".
When using the PDS (Pocket PC)
Select "Programming".
4. Then, select items from the screen menu in the following order.
1. Select "PATS Functions".
5. Select "Customer Spare Key Programming Enable" or "Customer Spare Key Programming Disable" from
the M-MDS screen menu. Additional key programming procedure is as follows according to the selected
menu:
ADDITIONAL KEY REGISTRATION METHOD
Setting
Customer spare key programming enable
Customer spare key programming
disable
x. Procedure is possible
-. Procedure is not possible
6. Perform the security access according to the directions on the M-MDS screen. (See SECURITY
ACCESS PROCEDURE.)
7. After verifying that the PATS function menu is displayed again on the M-MDS or equivalent screen,
select "Exit (From This Menu)" to finish the M-MDS procedure.
8. After Step 7, wait 5 s or more and then turn the ignition switch to the LOCK position.
9. Verify that the all keys can start the engine for 5 s or more after the procedure.
NO.5 RESETTING PROCEDURE FOR THE IMMOBILIZER SYSTEM WHEN REPLACING THE
INSTRUMENT CLUSTER REPLACEMENT
Conditions
Have two or more keys to be programmed after the key ID number clearing.
CAUTION:
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Security and Locks - Mazda CX-9
Although the security light starts flashing and DTC 15 is displayed
after approx. 1 min, this does not indicate an improper procedure.
Continue to perform the procedure as indicated.
Before starting Step 1, complete the procedure for the
Additional key registration method
Procedure using two valid
keys
X
-
Procedure using the M-
MDS
X
X