Mazda CX-9 Grand Touring 2009 Manual page 1570

CAUTION:
6. Press the front sash molding from the vehicle rear in the direction shown in the arrow and install tab C.
NOTE:
DOOR SASH FILM INSTALLATION
1. Remove any grease or dirt from the affixing surface of the door.
2. Cut away the unused portion along the dotted lines.
Fig. 36: Identifying Door Sash Film Area
Courtesy of MAZDA MOTORS CORP.
2008 Mazda CX-9 Grand Touring
2008 ACCESSORIES & BODY, CAB Exterior Trim - Mazda CX-9
Do not press the front sash molding in any place other than the
rubber areas.
After installing the front sash molding, verify that tabs A and B are
connected properly to the body.
Fig. 35: Identifying Double-Sided Adhesive Tape And Front Sash
Molding
Courtesy of MAZDA MOTORS CORP.