Mazda CX-9 Grand Touring 2009 Manual page 1894

Fig. 45: Identifying Front Side Trim With Nut & Clips
Courtesy of MAZDA MOTORS CORP.
B-PILLAR LOWER TRIM REMOVAL/INSTALLATION
1. Remove the front scuff plate inner. (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
2. Remove the rear scuff plate inner. (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
3. Remove the front seat belt lower anchor installation bolt (Driver side). (See FRONT SEAT BELT
REMOVAL/INSTALLATION .)
4. Partially peel back the seaming welt.
5. Detach tabs A and clips B and D, and pins C, by pulling them in the direction of the arrow.
6. Remove the B-pillar lower trim.
7. Install in the reverse order of removal.
Fig. 46: Identifying B-Pillar Lower Trim With Tab & Clips
Courtesy of MAZDA MOTORS CORP.
B-PILLAR UPPER TRIM REMOVAL/INSTALLATION
1. Remove the following parts:
1. Front scuff plate inner (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
2. Rear scuff plate inner (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
3. Front seat belt lower anchor installation bolt (Driver side) (See FRONT SEAT BELT
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9