2008 ACCESSORIES & BODY, CAB Wiper/Washer System - Mazda CX-9
REAR WASHER NOZZLE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION .)
3. Remove the rear spoiler. (See REAR SPOILER REMOVAL/INSTALLATION .)
4. Press the tabs and remove the rear washer nozzle.
5. Install in the reverse order of removal.
6. Adjust the rear washer nozzle. (See REAR WASHER NOZZLE ADJUSTMENT.)
Fig. 34: Removing Rear Washer Nozzle
Courtesy of MAZDA MOTORS CORP.
REAR WASHER NOZZLE ADJUSTMENT
1. Insert a needle or an equivalent tool into the spray hole of the rear washer nozzle and adjust the nozzle
direction as shown.
2008 Mazda CX-9 Grand Touring