Mazda CX-9 Grand Touring 2009 Manual page 1882

Fig. 23: Identifying Ventilator Grille & Center Panel With Screw - Center
Courtesy of MAZDA MOTORS CORP.
REAR
1. Disconnect the negative battery cable.
2. Remove the console cover. (See CONSOLE COVER REMOVAL/INSTALLATION.)
3. Remove the rear cooler duct. (See REAR COOLER DUCT REMOVAL/INSTALLATION .)
4. Detach the pins A while holding the console cover.
5. Remove the ventilator grille in the direction of the arrow.
6. Install in the reverse order of removal.
Fig. 24: Identifying Ventilator Grille & Center Panel With Screw - Rear
Courtesy of MAZDA MOTORS CORP.
INNER SAIL GARNISH REMOVAL/INSTALLATION
1. Pull the sail garnish outward, then detach clips A.
2. Remove the inner sail garnish.
3. Install in the reverse order of removal.
2008 Mazda CX-9 Grand Touring
2008 BODY & ACCESSORIES Interior Trim - Mazda CX-9