Renault Laguna III Manual page 3476

Rear quarter panel window: Removal - Refitting
K91
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Remove:
- the rear parcel shelf side trim (see Rear parcel
shelf side trim: Removal - Refitting) (71A, Body
internal trim),
- the rear quarter panel trim (see Quarter panel
trim: Removal - Refitting) (71A, Body internal
trim).
- the rear quarter panel window trim (see 54A, Win-
dows, Quarter panel window trim: Removal -
Refitting, page 54A-21) (depending on the equip-
ment level),
- the body side trim (see 55A, Exterior protection,
Body side trim: Removal - Refitting, page 55A-
29) .
a Protect the body around the rear quarter panel win-
dow using masking tape.
WINDOWS
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Cut the cement bead (see Technical Note 560A).
a Remove the rear quarter panel window.
REFITTING
I - REFITTING PREPARATION OPERATION
a Refit:
- the rear quarter panel window trim on the rear
- the body side trim (see 55A, Exterior protection,
a For preparation and bonding (see Technical Note
560A).
II - REFITTING OPERATION FOR PART
CONCERNED
a Bond the rear quarter panel window.
a Adjust the clearance and for flush fitting.
54A-15
Note:
When removing and refitting the rear quarter
panel window, avoid cutting the indexing pin (1)
which is used for positioning the rear quarter
panel window correctly.
quarter panel window (see 54A, Windows, Quar-
ter panel window trim: Removal - Refitting,
page 54A-21) (depending on the equipment level),
Body side trim: Removal - Refitting, page 55A-
29) .
54A
122925