Renault Laguna III Manual page 3676

REAR SEAT FRAMES AND MECHANISMS
Rear bench seat mechanism: Removal - Refitting
a Unclip the rear bench seatback unlocking control (6)
.
REFITTING
I - REFITTING PREPARATION OPERATION
D91
a Always replace the nuts of the rear bench seat loc-
king mechanism.
K91
a Always replace the nuts (4) of the rear bench seat-
back locking mechanism.
II - REFITTING OPERATION FOR PART
CONCERNED
B91
a Clip on the rear bench seatback unlocking control
(2) .
K91
a Clip:
- the rear bench seatback unlocking control (6) ,
- the linkage (5) .
a Refit:
123313
- the rear bench seatback locking mechanism,
- new nuts (4) to the rear bench seatback locking
mechanism.
a Torque tighten the rear bench seatback locking
mechanism nuts (44 N.m).
a Refit the rear bench seatback centre hinge (3) .
a Assemble the 1/3 and 2/3 rear bench seatbacks.
D91
a Refit:
- the rear bench seat mechanism,
- the nuts of the rear bench seat locking mechanism.
III - FINAL OPERATION
D91
a Refit the rear wheel arch trim (see 71A, Body inter-
nal trim, Rear wheel arch lining: Removal - Refit-
ting, page 71A-17) .
76A-8
76A