Glass Run Channel In Rear Side Door: Removal - Refitting 66A-9 - Renault Laguna III Manual

Glass run channel in rear side door: Removal - Refitting
B91 or K91
REMOVAL
I - REMOVAL PREPARATION OPERATION
a Lower the rear side door's sliding window.
a Remove:
- the rear side door trim (see Rear side door trim:
Removal - Refitting) (72A, Side opening element
trim),
- the rear side door interior weatherstrip,
- the rear side door exterior weatherstrip (see 66A,
Window sealing, Rear side door exterior wea-
ther strip: Removal - Refitting, page 66A-8) ,
- the door sealing film (see 65A, Opening element
sealing, Door sealing film: Removal - Refitting,
page 65A-1) ,
- the door airbag module (see Seat base lever: Re-
moval - Refitting) (59A, Safety equipment).
a Wind the rear side door sliding window down to the
bottom of the door box section (see Sliding window
in rear side door: Removal - Refitting) (54A, Win-
dows).
a Remove the rear side door pillar exterior trim (see
Rear side door pillar exterior trim Removal - Re-
fitting) (56A, Exterior equipment).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
a Remove the rear side door window run channel star-
ting at (1) .
WINDOW SEALING
124339
66A-9
a Remove the rear side door window run channel at
(2) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
a Refit the rear side door window glass run channel.
66A
124338