Hardware Configuration In Ns2100 Cabinets; Maximum Number Of Modular Components, Ns2100 System; Ip And Telco Clim Coexistence Limits - HPE Integrity NonStop NS2100 Planning Manual

5 Hardware Configuration in NS2100 Cabinets

This section shows locations of hardware components within 36 and 42 U modular cabinets for
an NS2100 commercial server.
NOTE: Hardware configuration drawings in this section represent the physical arrangement
of the modular enclosures but do not fully show the PDUs. For information about PDUs, see
"Power Distribution for NS2100 Systems" (page

Maximum Number of Modular Components, NS2100 System

This table shows the maximum number of the modular components installed in an NS2100
system. These values might not reflect the system you are planning and are provided only as an
example, not as exact values.
Enclosure or Component
Blade element
System console
VIO enclosure
Storage CLIM
IP CLIM
Telco CLIM
CLIM patch panel
SAS disk enclosure
Maintenance switch
HPE R5000 UPS (for single-phase)
HPE R12000/3 UPS (for three-phase)
Extended runtime module (ERM) (for
single-phase)
ERM (for three-phase)
1
See "IP and Telco CLIM Coexistence Limits " (page 88)

IP and Telco CLIM Coexistence Limits

Your NS2100 system supports the following combinations of IP and Telco CLIMs:
CLIM Coexistence Limits
6 Supported Combinations
IP CLIM
0
1
0
1
88 Hardware Configuration in NS2100 Cabinets
1
NS2100 system
2-processor
2
2
2
4
2
2
1
4
2
1
1
2
2
Telco CLIM
0
0
1
1
44).
4-processor
4
2
2
4
2
2
1
8
2
1
1
2
2
for information about coexistence limits for IP and Telco CLIMs.