New And Changed Information In 697513-003; New And Changed Information In 697513-002; Document Organization - HPE Integrity NonStop NS2100 Planning Manual

New and Changed Information in 697513-003

"UPS and Data Center Power Configurations" (page 111)

New and Changed Information in 697513-002

The following changes have been made to this revision of the manual:
The 36U Intelligent rack is now supported for NS2100 systems. The following topics have
been added or modified:
◦
"36U Intelligent Rack Modular Cabinet Physical Specifications" (page
◦
"Modular Cabinet and Enclosure Weights With Worksheet" (page
◦
Figure 30 (page
◦
Figure 31 (page
The PDUs are always located at the lowest location in the rack even if there is a UPS or
UPS/ERM combination present. The following changes have been made to reflect the
changed PDU location:
◦
Figure 1 (page 14)
◦
The text and illustrations
modified.
◦
Illustrations in
◦
Illustrations in
The descriptions of the two different versions of the R12000/3 UPS have been corrected in
"UPS for a Three-Phase Power Configuration (Optional)" (page

Document Organization

Chapters
Chapter 1: NS2100 System Overview (page 13)
Chapter 2: Site Preparation Guidelines for NS2100
Systems (page 38)
Chapter 3: System Installation Specifications for NS2100
Systems (page 44)
Chapter 4: System Configuration Guidelines for NS2100
Systems (page 73)
Chapter 5: Hardware Configuration in NS2100 Cabinets
(page 88)
Appendices
Appendix A: Maintenance and Support Connectivity
(page 95)
Appendix B: Cables (page 103)
Appendix C: Operations and Management Using OSM
Applications (page 106)
91).
92).
has been modified.
in"Power Distribution Units (PDUs)" (page 44)
"AC Power Feeds" (page 50)
"Typical NS2100 Configurations" (page 89)
appendix has been added.
have been modified.
have been modified.
25).
Contents
This chapter provides an overview of the NS2100
commercial system.
This chapter outlines topics to consider when planning or
upgrading the installation site for the NS2100 system.
This chapter provides the installation specifications for a
fully populated NS2100 enclosure.
This chapter describes the guidelines for implementing
the NS2100 modular hardware.
This chapter shows the required locations for hardware
enclosures in the NS2100 cabinets.
This appendix describes the connectivity options, including
Instant Support Enterprise Edition (ISEE) for maintenance
and support of all the NS2100 systems.
This appendix identifies the cables used with the NS2100
hardware.
This appendix describes how to use the OSM applications
to manage NS2100 systems.
New and Changed Information in 697513-003
66).
67).
have been
9