Wiring Outputs; To Set Up An Output - Nordson ProBlue P4 Customer Product Manual

E 2014 Nordson Corporation
Figure 3‐10

Wiring outputs

To set up an output

Set up the parameter control option for each output that you connected to the
melter. Table 3‐9 lists the available control options. Refer to Setting Up the
Melter earlier in this section for information about how to select operating
parameters and edit parameter control options.
The output capacity of the melter may
be increased from three outputs to
seven outputs by adding an optional
I/O expansion card that is available
from Nordson Corporation.
TB2
1 2 3 4 5 6 7
Section 7, Parts
3-45
Installation
Part 1024496_06