Change History Log; Change History Log Examples - Nordson ProBlue P4 Customer Product Manual

First Digit
Second Digit
P
(Parameter)
-
S
(Set‐point)
E 2014 Nordson Corporation
Table 3‐7 Change History Log
Indicates the number of the parameter that was changed
Are used in conjunction with the LEDs on the component keys to indicate the
location and method of a set‐point temperature change.
And the Fourth
When this LED
Digit
is on..
Indicates..
Tank Key 1
Hose Key 1– 6
Gun Key 1– 6
All Keys 0
Hose Key 0
Gun Key 0

Change History Log Examples

Example 1:
Parameter 4 (ready delay) was changed.
Example 2:
If the LED on the gun key is on, then this display would
indicate that the global‐by‐component method was used to change the
temperature of the guns.
Third and Fourth Digits
The change
was to..
The tank
A single hose
A single gun
All components
All hoses
All guns
3-37
Installation
And the
Method of
Change was..
Individual
Individual
Individual
Global
Global‐by‐
component
Global‐by‐
component
Part 1024496_06