Table of Contents
Advertisement
3-26
Installation
Operating Parameters
Part 1024496_06
The melter uses operating parameters to store noneditable and editable
values. Noneditable values are those that provide information about the
historical performance of the melter. Editable values are either a numeric
set‐point or a control option setting. Control options settings affect the display
of information or the function of the melter.
Operating parameters are stored in the melter's firmware in the form of a
sequentially numbered list. The list is organized into the logical groups
described in Table 3‐5.
Table 3‐5 Parameter Groups
Parameter
Group
Numbers
Standard
0 to 11 and 14
Temperature Control
20 to 26
Input Setup
30 to 39
Output Setup
40 to 46
Seven-day Clock
50 to 77
In addition to the ability to read and edit parameter values, you can also save
and restore the current value of every operating parameter and review a log
of the last ten changes that were made to editable parameters.
Selecting Operating Parameters
Table 3‐6 provides a complete list of the operating parameters.
Review the list to determine which operating parameters would best support
your manufacturing process. Refer to Appendix B, Operating Parameters, for
detailed information about each parameter. Appendix B contains a complete
description of each parameter, including its affect on the melter, default
value, and format.
NOTE: Parameters that are used to configure optional equipment or that are
otherwise reserved in the firmware are excluded from Table 3‐6 and
Appendix B.
Reading or Editing Operating Parameters
Regardless of whether a parameter's value is editable or not, the procedure
for accessing each parameter in order to read or edit its current value is the
same.
Group Description
Noneditable and other frequently used
parameters
Control heaters
Configure the standard and optional inputs
Configure the standard and optional outputs
Configure the clock feature
E 2014 Nordson Corporation
Advertisement
Table of Contents
Troubleshooting
