Installing The Software; Blue Series Software Versions - Nordson ProBlue P4 Customer Product Manual

Adhesive melters
Table of Contents

Advertisement

C-2
Melter Communications

Installing the Software

Version
Single installation file:
BlueSeries.exe
Self-extracting span diskette set:
BlueSeriesSpan.exe
Part 1024496_06
To meet your specific installation conditions, two versions of the software are
available. Refer to Table C‐1 to determine which version you need.
Table C‐1 Blue Series Software Versions
You are downloading the software from www.enordson.com and the PC you are
downloading onto is connected or can be connected to the melter
OR
You are downloading the software from www.enordson.com onto a PC that can not be
connected to the melter, but the PC does have a CD-RW and the PC that is connected to
the melter does have a CD drive
OR
You have a CD with the software and you have a PC with a CD drive that can be
connected to the melter
You are downloading the software from www.enordson.com onto a PC that cannot be
connected to the melter and the PC that is connected to your melter only has a 3.5-inch
floppy drive
When the installation file is executed, an installation wizard will detect your
operating system and start the installation routine.
NOTE: Installing the NCM for the first time also installs the latest version of
the melter's firmware.
Use When...
E 2014 Nordson Corporation

Advertisement

Table of Contents
loading

This manual is also suitable for:

Problue p10Problue p7

Table of Contents

Save PDF