Safety Labels and Tags
E 2014 Nordson Corporation
Figure 1‐1 illustrates the location of the product safety labels and tags affixed
to the equipment. Table 1‐2 provides an illustration of the hazard
identification symbols that appear on each safety label and tag, the meaning
of the symbol, or the exact wording of any safety message.
The installation kit provided with the melter may contain label overlays that
are printed in a variety of languages. If required by governing safety
regulations, apply the appropriate overlay to the text portion of the labels
shown in Figure 1‐1.
1
Figure 1‐1
Location of safety labels and tags
Table 1‐2 General Safety Warnings and Cautions
Item
WARNING
Burn hazard.
1
Hot adhesive.
Release pressure before servicing.
CAUTION
2
Burn Hazard. Hot Surfaces.
WARNING
Burn hazard.
3
Hot adhesive.
Release pressure before servicing.
WARNING
4
Hazardous voltage.
Disconnect all power supply connections before servicing.
Symbol means: Hot Surface! Do not touch.
5
Issued 10-11
2
3
5
Description
1-11
Safety
4