Operating Parameters - Nordson ProBlue P4 Customer Product Manual

E 2014 Nordson Corporation

Operating Parameters

Operating parameters are organized in this appendix according to the logical
groups listed in Table B‐1. For information about selecting and editing
operating parameters, refer to Section 3, Installation, Setting Up the Melter.
NOTE: Parameter numbers that are reserved or that are not used do not
appear in this appendix.
Table B‐1 Parameter Groups
Parameter
Group
Standard 0 to 11 and 14
Temperature Control 20 to 26
Input Setup 30 to 39
Output Setup 40 to 46
Seven-day Clock 50 to 77
Operating Parameters
Description
s
Frequently used parameters
Control heater function
Configure the standard and optional inputs
Configure the standard and optional out-
puts
Configure the clock feature
B-1
Appendix
B
Part 1024496_06