Routing Table; Static Routing - TP-Link JetStream T2700G-28TQ User Manual

Interface Setting Detail Information

Displays the detailed setting information of the interface.

10.2 Routing Table

This page displays the routing information summary generated by different routing protocols.
Choose the menu Routing→Routing Table→Routing Table to load the following page.
Routing Information Summary

Protocol
Destination/Mask:
Next Hop:
Distance:
Metric:
Interface name:

10.3 Static Routing

Static routes are special routes manually configured by the administrator and cannot change
automatically with the network topology accordingly. Hence, static routes are commonly used in a
relative simple and stable network. Proper configuration of static routes can greatly improve
network performance.
10.3.1 Static Routing
Choose the menu Routing→Static Routing→Static Routing Config to load the following page.
Figure 10-4 Routing Table
Displays the protocol of the route.
Displays the destination and subnet of the route.
Displays the IP address to which the packet should be sent next.
Displays the management distance of the route. The smaller the
distance is, the higher the priority is.
Displays the metric of the route.
Displays the description of the egress interface.
Figure 10-5 Static Routing Config
146